Produced by following state-of-the-art processes, using high-tech machines and premium quality raw materials, these reciprocating/sabre saw blades have been specifically designed to ensure maximum lifetime and performance in all materials.
HCS (high carbon steel). Use for cutting softwood and plastic.
BIM (bimetal with 8% cobalt). Provides extreme results in performance and lifetime when cutting metals, nail embedded wood and plastic.
HW (tungsten carbide). Use for cutting fiber cement boards, bricks and porous concrete.
Why geometry is important.
Ground and taper ground teeth. Easily cut construction wood, plywood, framing lumber and plastic.
Milled and side set teeth. For quick and Xtreme cuts into soft or hardwood, aluminium, plastic, ferrous and non-ferrous metal.
Milled and wavy set teeth. For fine and precise cuts into thin and thick metal, pipes, open and closed profiles.
JS922EF
For cutting thin sheet metal from 1,5mm to 4mm (1/16" - 5/32") in thickness, pipe and profiles with less than 100mm (4") in diameter.
JS922HF
For repairing pallets, for cutting wood with nails or metal with less than 100mm (4") in thickness, sheet metal, pipe, aluminium profiles from...
JS922VF
For cutting wood with nails or metal with less than 100mm (4") in thickness, sheet metal, pipe, aluminium profiles from 3mm to 10mm (1/8"...
JS925VF
For cutting medium-thick to thick sheet metal from 2mm to 10mm (5/64" - 25/64") in thickness, thin to thick-walled pipe and profiles with...
S1225VF
For cutting medium-thick to thick sheet metal from 2mm to 10mm (5/64" - 25/64") in thickness, thin to thick-walled pipe and profiles with...
Web dev by Artistiko Studio - Italy
We ship Worldwide.
